The national standard specifications of synthetic resin tiles are usually 0.88M and 0.96M, the thickness is 3MM, and the weight per square meter is 6KG. When the standard synthetic resin tiles are purchased, they will show the relevant test report of the National Chemical Building Materials Testing Center (there is no national chemical The test report of the Building Material Testing Center is not allowed to be sold on the market):

1. Artificial aging test report (10,000 hours of artificial aging is equivalent to more than 20 years of actual use)

2. Low temperature drop hammer impact (0℃, 1h) test report (One kilogram of steel ball falls freely on the tile surface from a height of 1 meter without cracking,There is no damage to the product after 10 impacts of the low temperature falling ball After 10 freeze-thaw cycles, the product has no hollowing, blistering, peeling, cracking, etc. )The standard synthetic resin tile itself has very good load resistance,Tested by the National Quality Supervision Station for Building Materials and Components, the support interval is 750mm,There is no damage under the uniform load of 150KG.Inferior synthetic resin tiles will break when workers step on the tiles.

3. Fireproof building materials inspection report (Building interior decoration design fire protection code A2.6 plastic combustion performance judgment B1 above)

4.The standard synthetic resin tile can resist the corrosion of various chemical substances such as acid, alkali and salt for a long time.Soaking in salt, alkali and various acids below 60% has no chemical effect for 24 hours. Inferior synthetic resin tile surface layer using its pigment will produce a chemical reaction, and even fade.

5.Synthetic resin tiles have passed China’s environmental labeling product certification and meet recycling standards. When the product’s service life ends, it can be completely recycled and reused. Reach the level of environmental protection